How to fix crumbling or lose brick mortar

Brick is a sturdy, long-lasting material that strengthens entire building structure. However, mortar (mixture of cement and sand) that holds bricks together can crumble or loosen after few years. Therefore, regular maintenance of bricked masonry is recommended by all professional restoration contractors. 

The process of repairing crumblingbrick mortar is known as re-pointing or tuckpointing. To repair your masonry always consult specialists in brick repair. But, if you know the technicalities of building restoration and want to repair damaged masonry yourself,then you may take following expert suggestions to improve look as well as strength of your building.

Professional tuckpointing contractors Evanston suggest to chip out old mortar carefully with a cold chisel or flat utility chisel. You can remove old mortar while hitting under the mortar with chisel and light hammer blows. This will finely remove the lose mortar without damaging any of the bricks. Now, dust off the empty cavity and clean it well to improve adhesion of the new mortar, says masonry contractors Lakeview. 

According to experts in brick repairLincoln Park, there is no need of wasting your money on buying new bricks if old one is perfectly fine and strong. You just have to take out the complete brick from the masonry and thoroughly clean off mortar remains from it, so you can reuse the same brick once again. Specialist in brick repair Park Ridge, further adds to the point that you must prepare a thick mixture of cement and sand for perfect adhesion that could last for years to come.

Tuckpointing contractors Oak Park recommends for a careful re-pointing as it could make or break the entire look of your brick masonry. You must pack the exuding mortar finely into the joints using brick trowel, suggests the tuckpointing contractors Hinsdale. These useful tips will certainly help you to recover your damaged masonry for long duration.