Tuesday 10 March 2015

DIY steps to Stucco Repair

How to repair stucco?

Stucco is made up of an aggregate, a binder and water, which is used as a decorative coating for walls and ceilings and even as a sculptural and artistic material in architecture. It is used to cover less visually appealing construction material like metal. Concrete, clay or brick, etc. Making simple repair in stucco is not a difficult job. Read more to know more!

If stucco is in good shape, it is one of the most attractive construction material. It is relatively reasonable, looks good and last for years. Stucco is very strong and therefore stands up well to create an effect. But, it is brittle and therefore can crack or break off in chunks. Repairing it is very important because even a crack in a home’s stucco exterior can cause moisture and the deterioration of exterior walls.


Below are the DIY tips to repair stucco. Have a look and try them yourself to repair the cracks or holes in your stucco.

1. Match colors:  Over the years, the stucco on your walls looses its color, so probably your new patch won’t match it. For this, you can buy a coloring pigment to add to your stucco mix to match it with the existing color. Now, mix small batches of stucco and add some pigment to the mixture. Put it on a piece of cardboard and let it dry. You will have to try different amounts of pigment till you get the desired color.

2.Prepare the surface: It is important to prepare the surface on which the stucco is to be applied. Therefore, chip away the loose pieces of the old stucco using a mason’s chisel and hammer.

3.Repair the mesh: To repair the damaged wire mesh under the stucco, cut a new piece to fit into the opening and fasten it in place with galvanized nails.

4.Apply the Stucco:Mix a batch of stucco patching compound and fill it in the opening of the wire mesh using a trowel.

5.Finish the surface: Slide a piece of board to set and smooth the patch surface level with the surrounding wall. Try to match the pattern of the surrounding wall using your “finishing” tool, while your new stucco is still slightly moist.


Click here to know more about Stucco Repair

0 comments:

Post a Comment